Introduction
A guide to disassemble Google Home Mini for further repairs.
Ce dont vous avez besoin
-
-
Remove the rubber bottom as per the Google Home Mini teardown guide.
-
Remove the four 7mm T6 Torx screws from the bottom.
-
-
-
-
Using a pair of tweezers, unlatch the Zero Insertion Force (ZIF) fastener that connects the ribbon cable to the board.
What if this breaks off. Can i direct connect power.
Where to buy it please tell please
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
12 autres ont terminé cette réparation.
2 commentaires
How did you get the rubber base off of it?
There’s a little more explanation here