Introduction
Use this guide to replace the power jack on your Graco Secure Coverage Digital Baby Monitor for nursery unit.
The power jack replacement includes the power jack and battery replacement.
Ce dont vous avez besoin
-
-
Remove the 9mm screw from the battery cover of the nursery unit using a Phillips #1 tip screwdriver.
-
-
-
Remove the two 9mm Phillips #1 screws from the rare case of the device.
-
Place the screws in a secure place.
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.