Aller au contenu principal

HMDX Chill Disassembly

Ce dont vous avez besoin

  1. HMDX Chill Disassembly, Remove Rubber Base: étape 1, image 1 de 3 HMDX Chill Disassembly, Remove Rubber Base: étape 1, image 2 de 3 HMDX Chill Disassembly, Remove Rubber Base: étape 1, image 3 de 3
    • Insert a metal spudger under the rubber base.

    • Pry the rubber base off.

  2. HMDX Chill Disassembly: étape 2, image 1 de 1
    • Use a Phillips #1 screwdriver to remove four 9 mm screws from the base of the device.

  3. HMDX Chill Disassembly: étape 3, image 1 de 2 HMDX Chill Disassembly: étape 3, image 2 de 2
    • Grip the base of the HMDX Chill.

    • Pull the base upwards.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jourdan Holubasch

Membre depuis le 03/31/16

759 Réputation

7 tutoriels rédigés

Équipe

EWU-Giguere-S16S1G1 Membre de l'équipe EWU-Giguere-S16S1G1

Community

4 membres

7 tutoriels rédigés

Un commentaire

I have jam zero chill. One year old. Very very little use. Maybe 3 to 4 hours total.

Plug in to charge red light comes on solid and goes out in couple of hours. Then light flashes red and zero chill will not connect.

Thank you

Lorne Janes - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 3

Total : 1,419