Aller au contenu principal

Introduction

The microphone is soldered into the motherboard. This guide requires a knowledge of soldering. The back panel must be removed to access the microphone.

Pièces

Aucune pièce spécifiée.

  1. Identify the SD card port.
    • Identify the SD card port.

  2. Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.
    • Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.

    • Do not insert opening tool too far. Avoid making contact with the metal inside the port.

  3. Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.
    • Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.

  4. Separate the back panel from the rest of the device.
    • Separate the back panel from the rest of the device.

  5. Desolder the microphone wires from the motherboard.
    • Desolder the microphone wires from the motherboard.

  6. Separate the microphone from the rest of the device.
    • Separate the microphone from the rest of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Bryce Harmsen

Membre depuis le 25/09/2018

593 Réputation

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 67