Aller au contenu principal

HP 14-ac151nr DC Power Jack Replacement

Ce dont vous avez besoin

  1. HP 14-ac151nr DC Power Jack Replacement, Backplate: étape 1, image 1 de 1
    • Remove battery by pushing the two buttons inward.

  2. HP 14-ac151nr DC Power Jack Replacement: étape 2, image 1 de 1
    • Remove the two rubber feet next to the battery.

  3. HP 14-ac151nr DC Power Jack Replacement: étape 3, image 1 de 1
    • Remove all 14 Phillips head #0 screws.

  4. HP 14-ac151nr DC Power Jack Replacement: étape 4, image 1 de 1
    • Use a plastic opener tool to pry off the black backplate.

  5. HP 14-ac151nr DC Power Jack Replacement, DC Power Jack: étape 5, image 1 de 2 HP 14-ac151nr DC Power Jack Replacement, DC Power Jack: étape 5, image 2 de 2
    • Remove the black tape near the power jack.

    • Remove the screws connecting monitor to the bottom of the computer.

  6. HP 14-ac151nr DC Power Jack Replacement: étape 6, image 1 de 1
    • Position the metal fittings attached to the monitor out of the way.

    • The monitor is still attached by wires — be careful not to pull on it too hard.

  7. HP 14-ac151nr DC Power Jack Replacement: étape 7, image 1 de 3 HP 14-ac151nr DC Power Jack Replacement: étape 7, image 2 de 3 HP 14-ac151nr DC Power Jack Replacement: étape 7, image 3 de 3
    • Disconnect the power jack from the motherboard.

    • Remove the power jack by lifting it up.

    • An opener tool may make this easier.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Antonio Leonti

Membre depuis le 10/26/18

410 Réputation

3 tutoriels rédigés

Équipe

UMass Dartmouth, Team S1-G7, Simcock Fall 2018 Membre de l'équipe UMass Dartmouth, Team S1-G7, Simcock Fall 2018

UMASSD-SIMCOCK-F18S1G7

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 418