Réparez vos affaires Communauté Boutique

HP 14-fq1025nr Screen Replacement

Introduction

In this guide, you will learn how to remove a HP 14-fq1025nr screen and replace it with a new one. The screen is used to display/output visual information such as a desktop, a document, or an application so that it can be seen by the user(s). A faulty screen may result in a large area of dead pixels (a pixel is a minute area of illumination on a screen) or a completely dead screen. For additional information and help with troubleshooting the screen, refer to our troubleshooting page.

Ce dont vous avez besoin

  1. HP 14-fq1025nr Screen Replacement, Back Cover: étape 1, image 1 de 1

    • Flip the laptop upside down so the bottom cover is facing up.

    Modifier

  2. HP 14-fq1025nr Screen Replacement: étape 2, image 1 de 1

    • Use a pair of tweezers to grab and pull the feet off of the cover.

    Modifier

  3. HP 14-fq1025nr Screen Replacement: étape 3, image 1 de 1

    • Remove the two 4 mm screws using a Phillips #0 screwdriver.

    • Remove the six remaining 6 mm screws located around the edges and underneath the feet using a Phillips #0 screwdriver.

    Modifier

  5. HP 14-fq1025nr Screen Replacement: étape 4, image 1 de 1

    • Flip the laptop right-side up and slide an iFixit opening tool and/or Jimmy inside of the bottom cover seam to pry it open.

    Modifier

  6. HP 14-fq1025nr Screen Replacement: étape 5, image 1 de 1

    • Remove the bottom cover.

    Modifier

  7. HP 14-fq1025nr Screen Replacement, Screen: étape 6, image 1 de 3 HP 14-fq1025nr Screen Replacement, Screen: étape 6, image 2 de 3 HP 14-fq1025nr Screen Replacement, Screen: étape 6, image 3 de 3

    • Remove the four black 5 mm screws holding down the two silver screen hinges using a Phillips #00 screwdriver.

    Modifier

  8. HP 14-fq1025nr Screen Replacement: étape 7, image 1 de 2 HP 14-fq1025nr Screen Replacement: étape 7, image 2 de 2

    • Unplug the screen from the motherboard by lifting the wire cover and removing the screen cord.

    • Separate the hinges from the computer.

    Modifier

  9. HP 14-fq1025nr Screen Replacement: étape 8, image 1 de 1

    • Remove the screen.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Yasli Kanimba Murenzi

Membre depuis le 09/27/22

193 Réputation

2 tutoriels rédigés

Badges: 3

Équipe

Utah Tech University, Team 1-6, McMurrin Fall 2022 Membre de l'équipe Utah Tech University, Team 1-6, McMurrin Fall 2022

UTAHTECH-MCMURRIN-F22S1G6

3 membres

9 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 15

Total : 249