Pièces

Aucune pièce nécessaire.

The first step you should take is to turn the laptop off.
  • The first step you should take is to turn the laptop off.

  • Next you want to get the prying tool and wedge it into the seam of the screen and outer casing.

Ajouter un commentaire

Once it is wedged in on one of the upper corners you want to gently lift and slide the tool down the sides and top of the seam until the frame pops off.
  • Once it is wedged in on one of the upper corners you want to gently lift and slide the tool down the sides and top of the seam until the frame pops off.

  • Continue moving the tool down, while wedged, to release the grasp. You will be left with just the screen in the casing.

  • While prying off make sure you have a good grasp on the computer. You will know it is coming off due to the audible clicks

Ajouter un commentaire

  • Next, you will want to unscrew the Phillips PM2.0×5.2 screws at the top of the screen with the #0 bit, this will allow the screen to pop off easily.

  • Once all the screws are removed, gently remove the screen from the outer casing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicole Mathieu

Membre depuis le 19/03/2018

557 Réputation

5 tutoriels rédigés

Équipe

UMass Dartmouth, Team S2-G4, Bernier Spring 2018 Membre de l'équipe UMass Dartmouth, Team S2-G4, Bernier Spring 2018

UMASSD-BERNIER-S18S2G4

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 13

Total : 41