Aller au contenu principal

HP 15-ay103dx Motherboard Replacement

Ce dont vous avez besoin

  1. HP 15-ay103dx Motherboard  Replacement, Battery: étape 1, image 1 de 1
    • Slide the two battery lock latches on the back of the device to the “unlock” position.

  2. HP 15-ay103dx Motherboard  Replacement: étape 2, image 1 de 1
    • Lift the battery upward to remove it from the device.

  3. HP 15-ay103dx Motherboard  Replacement, Back Panel: étape 3, image 1 de 1
    • Using the PH1 phillips-head screwdriver, remove all the 5/16 in. screws from the back of the device.

    • There should be 10 in total, be sure to keep them together!

  4. HP 15-ay103dx Motherboard  Replacement: étape 4, image 1 de 1
    • Locate the optical disc drive and remove it from the device by sliding it straight of the device.

  5. HP 15-ay103dx Motherboard  Replacement: étape 5, image 1 de 2 HP 15-ay103dx Motherboard  Replacement: étape 5, image 2 de 2
    • Covering the hinges of the device are rubber bumpers secured to the device using adhesive. Remove them carefully.

    • Place the adhesive side up as you will need to place them back after your replacement is complete.

  6. HP 15-ay103dx Motherboard  Replacement: étape 6, image 1 de 2 HP 15-ay103dx Motherboard  Replacement: étape 6, image 2 de 2
    • In the same spot you’ve just removed the bumpers from, you will find two 5/16 in. screws. Using the same Phillips-head screwdriver used in step 2, remove the screws

    • Be sure to keep the screws together!

  7. HP 15-ay103dx Motherboard  Replacement: étape 7, image 1 de 1
    • Carefully remove the back panel from the device.

    • If you are unable to do this with your hands, you can use a thin prying tool of your choice to make it easier!

  8. HP 15-ay103dx Motherboard  Replacement, Motherboard: étape 8, image 1 de 3 HP 15-ay103dx Motherboard  Replacement, Motherboard: étape 8, image 2 de 3 HP 15-ay103dx Motherboard  Replacement, Motherboard: étape 8, image 3 de 3
    • Disconnect the wires around the motherboard securing it to the device.

    • To do this, flip the black "switches" securing the wires into place upwards.

  9. HP 15-ay103dx Motherboard  Replacement: étape 9, image 1 de 1
    • Remove the six 5/16 in. screws holding the motherboard onto the device using the P1 philips-head screwdriver.

    • Be sure to keep them together!

  10. HP 15-ay103dx Motherboard  Replacement: étape 10, image 1 de 3 HP 15-ay103dx Motherboard  Replacement: étape 10, image 2 de 3 HP 15-ay103dx Motherboard  Replacement: étape 10, image 3 de 3
    • Disconnect the wire securing the whole motherboard located at the top to the motherboard.

    • This is possible with your fingers, but is easier to do using an iFixit opening tool.

  11. HP 15-ay103dx Motherboard  Replacement: étape 11, image 1 de 1
    • Carefully lift the motherboard to remove it from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Rafael Cardona Bautista

Membre depuis le 09/25/17

104 Réputation

1 tutoriel rédigé

Équipe

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 8

Total : 1,570