Introduction

Follow this repair guide if you believe your hard drive is not functioning properly and want to remove it.

Pièces

Aucune pièce nécessaire.

Turn power off using the power button located in the top left corner of the  keyboard. Press and hold the power button for 3 seconds until it turns off.
  • Turn power off using the power button located in the top left corner of the keyboard. Press and hold the power button for 3 seconds until it turns off.

Ajouter un commentaire

Close the laptop and flip it over so that the HP cover logo is on the underside of the laptop.
  • Close the laptop and flip it over so that the HP cover logo is on the underside of the laptop.

Ajouter un commentaire

  • Locate the battery and the two switches that release the battery when they are unlocked.

Ajouter un commentaire

  • Slide the left switch to the right so that the icon of a locked padlock is no longer visible and the icon of an unlocked padlock is now visible.

Ajouter un commentaire

  • With your left hand, slide the right switch to the left and hold it in place. This will unlock the battery and allow you to easily slide it out of its port.

  • While holding the switch in place, use your right hand to gently remove the battery from its port.

Ajouter un commentaire

  • Remove the thirteen 7 mm PH1 Phillips head screws from the bottom of the laptop.

Ajouter un commentaire

  • Pry up and detach keyboard.

Ajouter un commentaire

  • Remove the keyboard connection from the laptop by flipping up the black tab on the ZIF connector.

Ajouter un commentaire

  • Remove the palm rest using the blue spudger tool.

This step is not even close to being descriptive enough. The keyboard underlayment will not easy detach from the palm rest. Damage to the USB port will occur.

Joe Simmons - Réponse

  • Remove the five 3 mm PH1 Phillips head screws underneath keyboard.

Ajouter un commentaire

  • Remove metal keyboard underlayment.

Ajouter un commentaire

  • After removing the battery and palm rest, unscrew the two 3 mm PH1 Phillips head screws that hold the small tab that secures the connection of the USB port and headphone jack.

Ajouter un commentaire

  • Pull the connected cord out of the previously lifted tab and remove from laptop.

Ajouter un commentaire

  • Lift up hard drive.

Ajouter un commentaire

  • Remove the connection from the left of the hard drive connecting it to the rest of the laptop and remove the hard drive from the laptop.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Benjamin Poirier

Membre depuis le 17/10/2017

219 Réputation

2 tutoriels rédigés

Équipe

UMass Dartmouth, Team S1-G4, Simcock Fall 2017 Membre de l'équipe UMass Dartmouth, Team S1-G4, Simcock Fall 2017

UMASSD-SIMCOCK-F17S1G4

3 membres

6 tutoriels rédigés

Though similar, these directions do not work for me. I had 2 additional screws on the bottom and step 9 doesn't look like mine at as my metal section under the keyboard is attached to the palmrest and something else is holding the palmrest and the back of the system together by where the DVD drive is…

greywolfsojourner - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 12

7 derniers jours : 61

30 derniers jours : 337

Total : 1,403