1. Use phillips screwdriver flathead 2.5 mm to open the cover.
    • Use phillips screwdriver flathead 2.5 mm to open the cover.

  2. Use the Metal spudger set to gently open the front cover
    • Use the Metal spudger set to gently open the front cover

  3. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Use phillips screwdriver JIS J00 to open the screws holding the motherboard.
    • Use phillips screwdriver JIS J00 to open the screws holding the motherboard.

  5. Pull out the wires connected to the motherboard, so that it is removable. Then, take off the motherboard. Pull out the wires connected to the motherboard, so that it is removable. Then, take off the motherboard. Pull out the wires connected to the motherboard, so that it is removable. Then, take off the motherboard.
    • Pull out the wires connected to the motherboard, so that it is removable. Then, take off the motherboard.

  6. Use the Metal spudger set to gently take out the RAM and then replace it. Make sure to replace the RAM from the other side, underneeth the labtop.
    • Use the Metal spudger set to gently take out the RAM and then replace it.

    • Make sure to replace the RAM from the other side, underneeth the labtop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Abdulrahman Bogshan

Membre depuis le 02/10/2018

313 Réputation

3 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 39