Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using the plastic spudger, gently lift the 5 rubber pads away from their seating.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the five 6mm screws located under the removed pads using Phillips #00 screwdriver.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With the Phillips #00 screwdriver, remove the remaining eight 6mm screws. You will now have thirteen 6mm screws removed from the case.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
To continue removing the back cover, turn the laptop over as displayed.
-
Use the plastic spudger to gently pry around the base of the laptop from the back cover. Continue prying around the entire base of the laptop.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Gently lift the silver base of the laptop from the bottom, but do not remove it.
-
To remove the ribbon cables, lift the latch holding the ribbon cables in place and then pull them free.
-
Remove the keyboard panel from the laptop.
-
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.