Introduction

In this guide you will be shown how to remove the trackpad from the HP Chromebook CB2L.

Pièces

Aucune pièce nécessaire.

  1. Flip the Chromebook over, and starting at the top right or left hand corner of the large blue piece, use the plastic opening tool to remove it.
    • Flip the Chromebook over, and starting at the top right or left hand corner of the large blue piece, use the plastic opening tool to remove it.

    • Remove six 4.77mm screws using the Phillips #1 screwdriver.

    • This part has fragile plastic connectors on it. Do not damage them.

  2. Starting at either the top left or right hand corner of the exposed metal piece, use the blue plastic opening tool to remove the back panel.
    • Starting at either the top left or right hand corner of the exposed metal piece, use the blue plastic opening tool to remove the back panel.

    • Remove four 3.42mm screws using the Phillips #1 screwdriver.

    • Disconnect the battery from the motherboard.

    • Remove the battery.

    • Remove four 2.57mm screws using the Phillips #1 screwdriver.

    • Remove single 2.43mm screw using the Phillips #1 screwdriver.

    • Remove the metal piece along the bottom of the trackpad.

    • Use the plastic opening tool to carefully flip the black piece on the ribbon cable holder then remove the ribbon cable.

    • Push the trackpad out from the keyboard side.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nathan Petrie

Membre depuis le 31/10/2018

277 Réputation

2 tutoriels rédigés

Équipe

IUPUI, Team S1-G4, Harley Fall 2018 Membre de l'équipe IUPUI, Team S1-G4, Harley Fall 2018

IUPUI-HARLEY-F18S1G4

3 membres

2 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 25

Total : 35