Aller au contenu principal

Introduction

This guide will walk you through the process of removing a space bar key.

Pièces

Aucune pièce spécifiée.

  1. slide the latch to the right
    • slide the latch to the right

    • slowly raise screen up

  2. Place a plastic opening tool, under the edge of the space bar and gently pry up to release the spacebar. Place a plastic opening tool, under the edge of the space bar and gently pry up to release the spacebar. Place a plastic opening tool, under the edge of the space bar and gently pry up to release the spacebar.
    • Place a plastic opening tool, under the edge of the space bar and gently pry up to release the spacebar.

  3. observe the long metal rod attached to the bottom of the space bar unhook the ends of the metal rod from the keyboard, completely removing the space bar key
    • observe the long metal rod attached to the bottom of the space bar

    • unhook the ends of the metal rod from the keyboard, completely removing the space bar key

    • if you notice any dust, dip a cotton swab in alcohol and clean the area under the space bar

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andres Castro

Membre depuis le 20/03/2017

118 Réputation

1 tutoriel rédigé

Équipe

Texas Tech, Team S13-G4, Bennett Spring 2017 Membre de l'équipe Texas Tech, Team S13-G4, Bennett Spring 2017

TTU-BENNETT-S17S13G4

5 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 2

Total : 272