Introduction

Install the ink cartridge(s) when the printer runs out of ink or when the ink warning lights flash to prevent running out.

Outils

Aucun outil requis.

Pièces

  1. Turn on the printer by pressing the power button.
    • Turn on the printer by pressing the power button.

  2. Place your index finger in the opening on the front of the printer (right side below scanner/copier) and pull the door down.
    • Place your index finger in the opening on the front of the printer (right side below scanner/copier) and pull the door down.

    • Pull down on the tab that lies in the middle of the newly-exposed gray cover.

    • The tri-color cartridge sits on the left side; the black cartridge sits on the right.

    • Grab the cartridge from the top and bottom and pull down until it clicks.

    • Pull out the freed cartridge.

    • Take the replacement cartridge out of its packaging and pull off the plastic tab.

    • Do not touch the electrical contacts or ink nozzles. Touching may cause malfunctions.

    • Hold the cartridge on both sides with the title sticker facing upwards.

    • Slide the cartridge directly into open slot (tri-color on the left, black on the right).

    • Push it forward until you hear it snap.

    • Close the gray access door.

    • Wait 30 seconds for the alignment page to print.

    • Open up the scanner lid and place the alignment page face-down in the right-front corner of the glass.

    • Close the lid.

    • Press the color copy button to begin scan.

    • Wait until the power button stops blinking.

Conclusion

When the power button stops blinking, your can now use your printer.

4 autre(s) ont terminé cette réparation.

Daniel

Membre depuis le 06/10/2012

293 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 9-18, Amido Fall 2012 Membre de l'équipe Cal Poly, Team 9-18, Amido Fall 2012

CPSU-AMIDO-F12S9G18

4 membres

5 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 13

30 derniers jours : 56

Total : 12,645