Réparez vos affaires Communauté Boutique

HP Deskjet D1660 Rollers Replacement

Introduction

This guide will replace the small rollers located under the ink carriage. Rollers enable the papers to run smoothly through the printer and cleanly print out material.

Ce dont vous avez besoin

  1. HP Deskjet D1660 Rollers Replacement, Top Cover: étape 1, image 1 de 1

    • Remove the back two 14.0 mm Torx #10 screws.

    Traduire

  2. HP Deskjet D1660 Rollers Replacement: étape 2, image 1 de 1

    • Lay the printer on its back.

    • Grab the paper tray by its right side and pull it to the left and up.

    Traduire

  3. HP Deskjet D1660 Rollers Replacement: étape 3, image 1 de 1

    • Open the frontal access panel by lifting it from the top.

    • Similar to the paper tray, grab it from the right side and pull it to the left and up.

    Traduire

  5. HP Deskjet D1660 Rollers Replacement: étape 4, image 1 de 3 HP Deskjet D1660 Rollers Replacement: étape 4, image 2 de 3 HP Deskjet D1660 Rollers Replacement: étape 4, image 3 de 3

    • Take out the two frontal 14.0 mm Torx #10 screws.

    • Carefully lift the frontal cover.

    • Don't lift it up aggressively. A strip will be attached to it.

    Traduire

  6. HP Deskjet D1660 Rollers Replacement, Rollers: étape 5, image 1 de 2 HP Deskjet D1660 Rollers Replacement, Rollers: étape 5, image 2 de 2

    • Remove the five 13.0 mm Torx #10 screws found on top of the frame.

    • Remove the four 9.0 mm Torx #10 smaller screws.

    Traduire

  7. HP Deskjet D1660 Rollers Replacement: étape 6, image 1 de 2 HP Deskjet D1660 Rollers Replacement: étape 6, image 2 de 2

    • Lift the cover up using both of your hands.

    • Lift it carefully as a strip and motor will be connected to the bottom part of the printer.

    Traduire

  8. HP Deskjet D1660 Rollers Replacement: étape 7, image 1 de 2 HP Deskjet D1660 Rollers Replacement: étape 7, image 2 de 2

    • Locate the rollers, which will be on the bottom of the metal frame that holds the carriage.

    • Grab the rollers and remove them by pulling them to one side and lifting them up.

    • Do the same for the other three.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Justin Taiki Fukada

Membre depuis le 01/25/14

891 Réputation

7 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

Cal Poly, Team 1-41, Maness Winter 2014 Membre de l'équipe Cal Poly, Team 1-41, Maness Winter 2014

CPSU-MANESS-W14S1G41

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 1,202