Introduction

Paper trays help align papers once printed. Over time, the paper tray may lock itself or break. Ensure you have unplugged your device before you begin this repair.

Pièces

Aucune pièce nécessaire.

  1. Grab both sides of the printer and flip it away from you so the bottom is facing up. Grab both sides of the printer and flip it away from you so the bottom is facing up.
    • Grab both sides of the printer and flip it away from you so the bottom is facing up.

  2. Locate the 13mm TR10 Torx screws on the left side of the paper tray.
    • Locate the 13mm TR10 Torx screws on the left side of the paper tray.

  3. Unscrew and remove the 13mm TR10 Torx Security screw, starting with the farthest screw on the left Unscrew and remove the 13mm TR10 Torx Security screw, starting with the farthest screw on the left
    • Unscrew and remove the 13mm TR10 Torx Security screw, starting with the farthest screw on the left

  4. Locate and remove middle 13mm TR10 Torx Security  screw using a Torx screwdriver. Locate and remove middle 13mm TR10 Torx Security  screw using a Torx screwdriver.
    • Locate and remove middle 13mm TR10 Torx Security screw using a Torx screwdriver.

  5. Locate and remove the last 13mm TR10 Torx Security screw. Locate and remove the last 13mm TR10 Torx Security screw.
    • Locate and remove the last 13mm TR10 Torx Security screw.

  6. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  7. Locate the side tab and lift up to remove. Locate the side tab and lift up to remove.
    • Locate the side tab and lift up to remove.

  8. Locate the three 13mm TR10 Torx Security screws on the right side panel.
    • Locate the three 13mm TR10 Torx Security screws on the right side panel.

  9. Locate and remove the farthest 13mm TR10 Torx Security screw. Locate and remove the farthest 13mm TR10 Torx Security screw.
    • Locate and remove the farthest 13mm TR10 Torx Security screw.

  10. Locate middle 13mm TR10 Torx Security screw and remove it. Locate middle 13mm TR10 Torx Security screw and remove it.
    • Locate middle 13mm TR10 Torx Security screw and remove it.

  11. Locate last 13mm TR10 Torx Security screw and remove it. Locate last 13mm TR10 Torx Security screw and remove it.
    • Locate last 13mm TR10 Torx Security screw and remove it.

  12. Locate tab on the right side panel and lift to remove it. Locate tab on the right side panel and lift to remove it.
    • Locate tab on the right side panel and lift to remove it.

  13. The back should look like this.
    • The back should look like this.

  14. Remove paper tray by pulling it out and away from the printer. Be cautious of jumping springs once pulling out the paper tray. Be cautious of jumping springs once pulling out the paper tray.
    • Remove paper tray by pulling it out and away from the printer.

    • Be cautious of jumping springs once pulling out the paper tray.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Elizabeth Surface

Membre depuis le 26/08/2015

1 386 Réputation

9 tutoriels rédigés

Équipe

USF Tampa, Team 4-6, Meier Fall 2015 Membre de l'équipe USF Tampa, Team 4-6, Meier Fall 2015

USFT-MEIER-F15S4G6

4 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 21

Total : 310