Introduction

AC Adapters control the flow of electricity from the outlet to your device. Over time, they may fail. Ensure you have unplugged your device before you begin this repair.

Pièces

Aucune pièce nécessaire.

Open the the printer by lifting the top section. Make sure you're lifting from the lowest portion of the scanner section.
  • Open the the printer by lifting the top section. Make sure you're lifting from the lowest portion of the scanner section.

Ajouter un commentaire

Locate 13mm TR10 Torx Security screw behind screen and remove using Torx screwdriver.
  • Locate 13mm TR10 Torx Security screw behind screen and remove using Torx screwdriver.

Ajouter un commentaire

  • Remove case covering by lifting it up to reveal the power cord.

Ajouter un commentaire

  • Locate power cord.

  • Pull it out.

Ajouter un commentaire

  • Locate 13mm TR10 Torx Security screw behind screen and remove with screwdriver.

Ajouter un commentaire

  • Use a metal spudger around the edge to remove AC adapter cover.

Ajouter un commentaire

  • Pull the AC adaptor up and out of its casing

Ajouter un commentaire

  • Disconnect the wires from the AC adaptor.

  • Replace AC Adapter box. Reverse order of instructions for reassembly.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Justin

Membre depuis le 15/02/2018

161 Réputation

1 tutoriel rédigé

Équipe

USF-Leahy-S18S1G1 Membre de l'équipe USF-Leahy-S18S1G1

Community

3 membres

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 16

Total : 127