Aller au contenu principal

HP Elite x2 1012 G2 Prop Stand Replacement

Ce dont vous avez besoin

  1. HP Elite x2 1012 G2 Prop Stand Replacement, Prop Stand: étape 1, image 1 de 2 HP Elite x2 1012 G2 Prop Stand Replacement, Prop Stand: étape 1, image 2 de 2
    • Lift the prop stand approximately 140 degrees from its home position to expose two T5 Torx head screws.

  2. HP Elite x2 1012 G2 Prop Stand Replacement: étape 2, image 1 de 1
    • Use the T5 Torx bit to remove both screws from the prop stand pivot points.

  3. HP Elite x2 1012 G2 Prop Stand Replacement: étape 3, image 1 de 1
    • Gently pull the stand away from the device until you can lift the prop stand away from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

kefil

Membre depuis le 04/06/19

106 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S13-G13, Wilson Spring 2019 Membre de l'équipe IUPUI, Team S13-G13, Wilson Spring 2019

IUPUI-WILSON-S19S13G13

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 966