HP EliteOne 800 G1 RAM Replacement

Introduction

This guide will show you how to replace a RAM unit in the HP EliteOne 800 G1. There are many small parts removed during this guide, so it is important to keep track of all the components that are removed to assemble the device .

Étape 1 Removing the Back Cover

HP EliteOne 800 G1 RAM Replacement, Removing the Back Cover: étape 1, image 1 de 3

HP EliteOne 800 G1 RAM Replacement, Removing the Back Cover: étape 1, image 2 de 3

HP EliteOne 800 G1 RAM Replacement, Removing the Back Cover: étape 1, image 3 de 3

Place computer with the screen down on a flat surface.
Push the two locking latches to the unlocked position.
Push the cover toward the top of the computer and lift up.

Modifier

Étape 2 RAM

HP EliteOne 800 G1 RAM Replacement, RAM: étape 2, image 1 de 2

HP EliteOne 800 G1 RAM Replacement, RAM: étape 2, image 2 de 2

Notice the 2 latches on either side of the RAM stick.
Press latches outward and RAM stick will flip up to about a 30 degree angle.

Modifier

Étape 3

Gently pull the RAM stick up at an angle. You may need to wiggle the stick up and down or side to side in order to get it loose.

Modifier

Étape 4

When replacing the RAM stick, take note of where the small notch on the stick is and where there is a similar notch on the slot. Make sure you position the new stick so that the notches line up.

Modifier