Introduction
The 11.4V battery powering the hp envy is stored inside the bottom part of your laptop. To access the battery the laptop must be taken apart.
Ce dont vous avez besoin
-
-
Remove the two no-slip covers on the rear, bottom side using spudger shown in top center of picture.
-
-
-
-
Remove the three 3 mm screws from the battery using Phillips #0 screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.