Réparez vos affaires Communauté Boutique

HP Envy 15-u001dx Wireless Network Card Replacement

Ce dont vous avez besoin

  1. HP Envy 15-u001dx Wireless Network Card Replacement, HP Envy 15-u001dx Disassembly: étape 1, image 1 de 1

    • Remove the two no-slip covers on the rear, bottom side using spudger shown in top center of picture.

    • The two in the front do not have to be removed as there are no screws underneath them.

    Modifier

  2. HP Envy 15-u001dx Wireless Network Card Replacement: étape 2, image 1 de 1

    • Remove the two cover tabs towards center of the bottom as there are screws underneath them.

    Modifier

  3. HP Envy 15-u001dx Wireless Network Card Replacement: étape 3, image 1 de 1

    • Remove all fourteen 4.5 mm screws from the bottom using a Phillips #0 screwdriver. Each location is marked by a red circle in the picture.

    Modifier

  5. HP Envy 15-u001dx Wireless Network Card Replacement: étape 4, image 1 de 1

    • Separate the top cover by using a spudger to go around the sides freeing the inside latches.

    • Once the bottom is free, carefully open to the inside as there are two ribbons that connect your keyboard and touch pad to the top cover.

    Modifier

  6. HP Envy 15-u001dx Wireless Network Card Replacement: étape 5, image 1 de 2 HP Envy 15-u001dx Wireless Network Card Replacement: étape 5, image 2 de 2

    • Use the spudger to detach the two ribbons from their connectors.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

    Modifier

  7. HP Envy 15-u001dx Wireless Network Card Replacement, Wireless Network Card: étape 6, image 1 de 1

    • Remove the Phillips #0 4.5 mm screw from the wireless network card located in the back, right side of the interior.

    Modifier

  8. HP Envy 15-u001dx Wireless Network Card Replacement: étape 7, image 1 de 1

    • Use the spudger to remove the antenna connector attached to the black wire labeled "1".

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

    Modifier

  9. HP Envy 15-u001dx Wireless Network Card Replacement: étape 8, image 1 de 1

    • Detach the antenna connector for the white wire labeled "2".

    Modifier

  10. HP Envy 15-u001dx Wireless Network Card Replacement: étape 9, image 1 de 1

    • Gently remove the card from its slot by pulling.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 4 autres contributeurs

Dakota Presley

Membre depuis le 10/05/16

885 Réputation

6 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

USF Tampa, Team 9-4, Lacy Fall 2016 Membre de l'équipe USF Tampa, Team 9-4, Lacy Fall 2016

USFT-LACY-F16S9G4

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 577