HP Envy M6-1205DX Palm Rest Replacement

Introduction

If your HP Envy M6-1205dx laptop has a broken front panel or poor functioning keys on the keyboard, it may be time to replace your palm rest or keyboard. This is a guide for replacing the palm rest or the keyboard on the HP Envy m6-1205dx laptop.

Before beginning the repair make sure that the software is not disabling some keys. Make sure that the laptop is powered down before proceeding with this guide.

Ce dont vous avez besoin

Étape 1 Battery

HP Envy M6-1205DX Palm Rest Replacement, Battery: étape 1, image 1 de 1

Lay the device face down to begin.

Modifier

Étape 2

Slide the release mechanism to the left to release the battery.

Modifier

Étape 3

Remove the battery.

Modifier

Étape 4 Back Panel

HP Envy M6-1205DX Palm Rest Replacement, Back Panel: étape 4, image 1 de 1

Using a Phillips #1 screwdriver, remove the 8.6 mm screw.

Modifier

Étape 5

Slide the center panel down to remove it.

Modifier

Étape 6 Palm Rest

HP Envy M6-1205DX Palm Rest Replacement, Palm Rest: étape 6, image 1 de 1

Set the computer facing upwards again.
Using the plastic opening tool gently pry the keyboard up.

Modifier

Étape 7

HP Envy M6-1205DX Palm Rest Replacement: étape 7, image 3 de 3

Flip the white tab on the large ribbon cable upward. Gently pull the large ribbon cable out to remove it.
Gently pull the small ribbon cable out to remove it.

Modifier