Introduction

If your computer turns on but nothing is displayed on the LCD, it might be time to replace it. This guide will walk you through each step.

Pièces

Aucune pièce nécessaire.

Remove the four 9mm Phillips #00 screws.
  • Remove the four 9mm Phillips #00 screws.

  • Remove the eight 9mm Phillips #00 screws.

Ajouter un commentaire

Use the plastic opening tool and your hands to remove the bottom cover.
  • Use the plastic opening tool and your hands to remove the bottom cover.

Ajouter un commentaire

  • Disconnect the battery power cable from the motherboard.

  • Remove the six 6mm Phillips #00 screws from the battery.

Ajouter un commentaire

  • Lift the battery out of the laptop.

Ajouter un commentaire

  • Remove the stickers from the bottom left and right corner of the device with a plastic opening tool.

Ajouter un commentaire

  • Remove the two 2.5mm Phillips #00 screws found underneath the previously removed stickers.

Ajouter un commentaire

  • Use the plastic opening tool to pry the bezel free from the LCD housing.

Ajouter un commentaire

  • Remove the four 2.5mm Phillips #00 screws located in each corner of the LCD screen.

Ajouter un commentaire

  • Use the plastic opening tool to remove the LCD screen from its housing.

  • Lay the LCD screen flat on the keyboard.

Ajouter un commentaire

  • Disconnect the cable which connects the LCD to the motherboard.

  • Pul the LCD screen out.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

codi whittaker

Membre depuis le 14/02/2018

433 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team S1-G4, Nance Spring 2018 Membre de l'équipe USF Tampa, Team S1-G4, Nance Spring 2018

USFT-NANCE-S18S1G4

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 55