Introduction

Reader will be able to successfully replace their Wi-Fi card in the device. A basic understanding of simple tools such as a screwdriver is needed. Any form of electricity must be removed from device, including the charging cable and battery.

Pièces

Flip the device upside-down so that its bottom is facing up.
  • Flip the device upside-down so that its bottom is facing up.

Ajouter un commentaire

Push the lever underneath the battery to the left as shown in the picture.
  • Push the lever underneath the battery to the left as shown in the picture.

Ajouter un commentaire

  • Lift the battery up out of its socket.

Ajouter un commentaire

  • After removing the battery, remove the circled screw.

Ajouter un commentaire

  • Remove the back cover.

Ajouter un commentaire

  • With the back cover removed, locate the Wi-Fi card which is positioned next to the Beats logo.

Ajouter un commentaire

  • Carefully remove gold-headed, black wires from Wi-Fi card with tweezers.

Ajouter un commentaire

  • After removing wires, remove circled screws from card.

  • Note: Laptop shown only has one screw holding in Wi-Fi card. Some models may have both.

Ajouter un commentaire

  • Wi-Fi card will raise out of device when screw is removed.

  • Gently pull card to the right to remove from device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

dylananthony

Membre depuis le 20/10/2016

507 Réputation

3 tutoriels rédigés

Équipe

UMass Dartmouth, Team S2-G5, Bernier Spring 2018 Membre de l'équipe UMass Dartmouth, Team S2-G5, Bernier Spring 2018

UMASSD-BERNIER-S18S2G5

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 34