Introduction

Use this guide to replace a faulty service cover on your HP Envy dv7t-7200 if the back cover has been broken, damaged, or will not stay on any longer.

Pièces

Aucune pièce nécessaire.

Turn the power off and disconnect all cables and cords from the laptop.
  • Turn the power off and disconnect all cables and cords from the laptop.

  • Place the computer on its top on a flat surface with the hinges facing away from you.

Ajouter un commentaire

Slide the battery release latch to the left which is located on the right-hand side of the battery.
  • Slide the battery release latch to the left which is located on the right-hand side of the battery.

Ajouter un commentaire

  • Tilt the battery away from you and lift out.

Ajouter un commentaire

  • Using a Phillips #01 screwdriver, remove the Phillips PM2.5×5.5 screw on the service cover.

  • This screw does not come out of the service cover completely once loosened.

Ajouter un commentaire

  • Slide the service cover toward the front of the laptop.

  • Lift the service cover to remove it from the laptop.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Krystal

Membre depuis le 16/10/2017

831 Réputation

8 tutoriels rédigés

Équipe

UW Tacoma, Team S3-G3, Liner Fall 2017 Membre de l'équipe UW Tacoma, Team S3-G3, Liner Fall 2017

UWT-LINER-F17S3G3

5 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 67