Introduction

This guide demonstrates how to properly remove the Hard Drive of a HP Envy m6-n010dx.

Pièces

Aucune pièce nécessaire.

Find the battery removal slider.
  • Find the battery removal slider.

  • Slide it across while simultaneously popping out and removing the device's battery.

Ajouter un commentaire

Remove the five marked screws found under the battery using a philips head screwdriver.
  • Remove the five marked screws found under the battery using a philips head screwdriver.

Ajouter un commentaire

  • Remove the small panel on the back by prying it off. This should reveal the hard drive.

Ajouter un commentaire

  • The hard drive is connected to the motherboard via this blue-tabbed cable, highlighted in red.

  • Gently pry off the cover to release the cable.

  • Slowly lift the hard drive out and away from the device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Johnathan Morales

Membre depuis le 08/02/2018

354 Réputation

3 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 8

Total : 65