Réparez vos affaires Communauté Boutique

HP Envy x2 13-j002dx Battery Replacement

Introduction

In this guide we will be opening up the HP Envy x2 13-j002dx and replacing the battery. This is an easier repair that can be done by just about anyone. The only screw driver required is a Philips #0 and a Philips #00 screw drivers. You will also need a pair of tweezers and a set of opening picks.

Ce dont vous avez besoin

  1. HP Envy x2 13-j002dx Battery Replacement, Battery: étape 1, image 1 de 1

    • Remove five 4mm Phillips #0 screws securing the lower case to the HP Envy x2 13-j002dx.

    Modifier

  2. HP Envy x2 13-j002dx Battery Replacement: étape 2, image 1 de 1

    • Use a Phillips #00 screwdriver to remove the two 3.5 mm screws from the bottom of the device—one on each side of the keyboard dock.

    Modifier

  3. HP Envy x2 13-j002dx Battery Replacement: étape 3, image 1 de 1

    • Use a pair of tweezers to remove the screw covers on the bottom of the device.

    • Use a Phillips #0 screwdriver to remove the two 4mm screws.

    Modifier

  5. HP Envy x2 13-j002dx Battery Replacement: étape 4, image 1 de 2 HP Envy x2 13-j002dx Battery Replacement: étape 4, image 2 de 2

    • Use an opening pick to remove the plastic cover above the back stand.

    • Pry the cover off.

    • Use a Phillips #0 screwdriver to remove the four 4 mm screws.

    Modifier

  6. HP Envy x2 13-j002dx Battery Replacement: étape 5, image 1 de 1

    • Use an opening pick and a prying tool, and go around the device to remove the back cover from the rest of the assembly.

    Modifier

  7. HP Envy x2 13-j002dx Battery Replacement: étape 6, image 1 de 1

    • Unplug the battery from the motherboard.

    Modifier

  8. HP Envy x2 13-j002dx Battery Replacement: étape 7, image 1 de 2 HP Envy x2 13-j002dx Battery Replacement: étape 7, image 2 de 2

    • Carefully pull up on the battery connector from the speaker.

    • Use a pair of tweezers and remove the taped down wire for the speaker.

    • Use a Phillips #00 screwdriver to remove the seven 3mm screws around the battery.

    Modifier

  9. HP Envy x2 13-j002dx Battery Replacement: étape 8, image 1 de 1

    • Carefully lift up and remove the battery.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 6 autres contributeurs

Aaron Page

Membre depuis le 01/17/19

418 Réputation

1 tutoriel rédigé

Badges: 8

+ 5 badges supplémentaires

Équipe

Eastern Washington University, Team S2-G4, Munoz Winter 2019 Membre de l'équipe Eastern Washington University, Team S2-G4, Munoz Winter 2019

EWU-MUNOZ-W19S2G4

2 membres

1 tutoriel rédigé

Un commentaire

For step 2, when I was taking the screws out, they were held in by the magnets that were on either side of them making it difficult to remove. I ended up having to use another magnet to get them out.

Reed Jochimsen - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 10

30 derniers jours : 17

Total : 1,898