Aller au contenu principal

HP Envy x360 m6-aq103dx CPU Fan Replacement

Ce dont vous avez besoin

  1. HP Envy x360 m6-aq103dx CPU Fan Replacement, Bottom Cover: étape 1, image 1 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement, Bottom Cover: étape 1, image 2 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement, Bottom Cover: étape 1, image 3 de 3
    • Flip the laptop over to expose the underside.

    • Remove the two grip pads with blue plastic opening tool by inserting the tool between the laptop and the pads and slowly lifting up.

    • The grip pads are tacky, remove slowly to avoid separating the adhesive.

  2. HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 2, image 1 de 1
    • Remove the two 8 mm Phillips Head screws that were under the grip pads using a Phillip's Head 1 Screwdriver.

  3. HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 3, image 1 de 1
    • Remove the six 5 mm Torx screws using a T5 Torx Screwdriver.

  4. HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 4, image 1 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 4, image 2 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 4, image 3 de 3
    • Use the nylon spudger to pop off the bottom cover by inserting it into the heat vent and twisting to the left or right.

    • You may hear a slight clicking or popping, but that is normal.

  5. HP Envy x360 m6-aq103dx CPU Fan Replacement, CPU Fan: étape 5, image 1 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement, CPU Fan: étape 5, image 2 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement, CPU Fan: étape 5, image 3 de 3
    • Put on the anti-static wristband first

    • Disconnect the port of the fan by flipping the black tab with the small blue plastic opening tool.

    • Remove the cable from the connector.

  6. HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 6, image 1 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 6, image 2 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 6, image 3 de 3
    • Peel back a little bit of the grey tape connected to the round cable with the big blue opening tool.

    • Using your fingers, peel the tape off of the body of the computer.

    • Peel slowly to avoid separating the adhesive.

  7. HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 7, image 1 de 2 HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 7, image 2 de 2
    • Remove the black cable from the fan by unclicking it from the plastic body of the fan with your fingers and move it out of the area.

    • There will be clicking sounds when the black cable is removed.

  8. HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 8, image 1 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 8, image 2 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 8, image 3 de 3
    • Disconnect the port with the red yellow and blue wires by dislodging the wires with your fingers.

  9. HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 9, image 1 de 1
    • Remove the two 4.5mm Phillips #1 screws.

  10. HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 10, image 1 de 1
    • Loosen the four black screws by the curved heat sink with a Phillips head 1 screwdriver.

    • These screws do not come off.

  11. HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 11, image 1 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 11, image 2 de 3 HP Envy x360 m6-aq103dx CPU Fan Replacement: étape 11, image 3 de 3
    • Lift the CPU fan out with your hand.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Jordan Eremeyeff

Membre depuis le 10/01/17

597 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team S4-G3, Livingston Fall 2017 Membre de l'équipe Cal Poly, Team S4-G3, Livingston Fall 2017

CPSU-LIVINGSTON-F17S4G3

4 membres

9 tutoriels rédigés

3 commentaires

Step 5-7 can be bypassed I didn’t need to do it

diego.montenegro23 - Réponse

My first home repair so far. Really easy to follow guide. Great job!

Caleb Robinson - Réponse

Purchased tools and did the steps, no issues. worth the tools to use later. Worked in iT anyways.

Roy Rodgers - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 13

Total : 4,448