Réparez vos affaires Communauté Boutique

HP LaserJet P1102w Motherboard Replacement

Introduction

These steps will show how to replace the motherboard from the printer. This guide may be used if the printer is experiencing systematic errors, was short circuited, or has issues connecting to devices.

Ce dont vous avez besoin

  1. HP LaserJet P1102w Motherboard Replacement, Left Side Panel: étape 1, image 1 de 3 HP LaserJet P1102w Motherboard Replacement, Left Side Panel: étape 1, image 2 de 3 HP LaserJet P1102w Motherboard Replacement, Left Side Panel: étape 1, image 3 de 3

    • Flip printer on it's back. Using the plastic spudger, pry off front panel. There will be two main points to focus as shown.

    • Pry carefully to not break any plastic.

    Modifier

  2. HP LaserJet P1102w Motherboard Replacement: étape 2, image 1 de 2 HP LaserJet P1102w Motherboard Replacement: étape 2, image 2 de 2

    • Now that the pry points are free lift up the front panel.

    Modifier

  3. HP LaserJet P1102w Motherboard Replacement: étape 3, image 1 de 2 HP LaserJet P1102w Motherboard Replacement: étape 3, image 2 de 2

    • Unscrew the #1 Phillips screw 6mm on the back of the printer.

    Modifier

  5. HP LaserJet P1102w Motherboard Replacement: étape 4, image 1 de 3 HP LaserJet P1102w Motherboard Replacement: étape 4, image 2 de 3 HP LaserJet P1102w Motherboard Replacement: étape 4, image 3 de 3

    • Using the plastic spudger, remove the button housing from the top left of printer.

    • Pry carefully to not break any plastic.

    Modifier

  6. HP LaserJet P1102w Motherboard Replacement: étape 5, image 1 de 2 HP LaserJet P1102w Motherboard Replacement: étape 5, image 2 de 2

    • Once the housing is removed, remove the three buttons.

    Modifier

  7. HP LaserJet P1102w Motherboard Replacement: étape 6, image 1 de 3 HP LaserJet P1102w Motherboard Replacement: étape 6, image 2 de 3 HP LaserJet P1102w Motherboard Replacement: étape 6, image 3 de 3

    • Use the plastic spudger to remove the side panel. There are three main prying points as shown.

    • Pry carefully to not break any plastic.

    Modifier

  8. HP LaserJet P1102w Motherboard Replacement: étape 7, image 1 de 2 HP LaserJet P1102w Motherboard Replacement: étape 7, image 2 de 2

    • With all pry points free, remove the side panel.

    Modifier

  9. HP LaserJet P1102w Motherboard Replacement, Motherboard: étape 8, image 1 de 3 HP LaserJet P1102w Motherboard Replacement, Motherboard: étape 8, image 2 de 3 HP LaserJet P1102w Motherboard Replacement, Motherboard: étape 8, image 3 de 3

    • Remove three #1 Phillips 6mm screws with the #1 Phillips screwdriver.

    Modifier

  10. HP LaserJet P1102w Motherboard Replacement: étape 9, image 1 de 3 HP LaserJet P1102w Motherboard Replacement: étape 9, image 2 de 3 HP LaserJet P1102w Motherboard Replacement: étape 9, image 3 de 3
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Using a pair of blunt nose tweezers, disconnect both ribbon wires.

    • With both ribbon wires removed we can lift the motherboard out of its housing.

    • There is a little black notch holding the motherboard down by the thumb in the final picture.

    • Be careful pulling, as ribbon wires are very fragile.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Jerome Etten

Membre depuis le 10/04/18

730 Réputation

4 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

UW Stout, Team S6-G4, Ogden Fall 2018 Membre de l'équipe UW Stout, Team S6-G4, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G4

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 13

30 derniers jours : 48

Total : 1,968