HP Media Center 876x TV Tuner Card Replacement

Rédigé par : Balakrishnan Pillai (et 4 autres contributeurs)

Commentaires : 0
Favoris : 1
Réparations terminées : 1

HP Media Center 876x TV Tuner Card Replacement

Difficulté

Facile

Étapes

Temps nécessaire

5 minutes

Introduction

The HP Media Center 876x is capable of receiving television service through its TV tuner card. If you are unable to receive proper service, the TV tuner card may require replacement.

Outils

Acheter ces outils

Phillips #0 Screwdriver

6,99 $US

Acheter

Pièces

Aucune pièce spécifiée.

Étape 1 Side Panel

Remove the two (9 mm) hand screws on the back panel.

Remove the two (9 mm) hand screws on the back panel.

Modifier

Étape 2

Slide the side panel horizontally to detach, and pull upward to remove.

Place the tower on its side.
Slide the side panel horizontally to detach, and pull upward to remove.

Modifier

Étape 3 TV Tuner Card

Identify the TV tuner card (distal from the cooling fan, in the lower-left corner of the tower).

Using a #0 Phillips head screwdriver, remove the one (6 mm) screw fastening the TV tuner card into its slot.

Identify the TV tuner card (distal from the cooling fan, in the lower-left corner of the tower).
Using a #0 Phillips head screwdriver, remove the one (6 mm) screw fastening the TV tuner card into its slot.

Modifier