HP Mini 311 Memory Shield Replacement

Introduction

If there is a need to operate any internal repairs on your HP Mini 311 then the removal of the memory shield is mandatory.

With the device still in a bottom side up position, proceed to unscrew the two 4.8mm Phillips 00 screws from the memory shield.
The screws will remain in the shied.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Membre depuis le 01/31/13

495 Réputation

6 tutoriels rédigés

CPSU-MANESS-W13S20G4

4 membres

6 tutoriels rédigés