HP OfficeJet 4650 Power Button Replacement

Introduction

The power button is what allows the printer to turn on. If the power button is malfunctioning, the HP OfficeJet 4650 will not function. This guide will show you how to replace the power button.

Ce dont vous avez besoin

Étape 1 Power Button

HP OfficeJet 4650 Power Button Replacement, Power Button: étape 1, image 1 de 3

HP OfficeJet 4650 Power Button Replacement, Power Button: étape 1, image 2 de 3

HP OfficeJet 4650 Power Button Replacement, Power Button: étape 1, image 3 de 3

Open the cartridge access door by putting one hand on the grooves of each side and pulling up.

Modifier

Étape 2

Using the 2.0 mm hex screwdriver, remove the 14 mm hex screw that binds the front cover to the printer body by turning the screw counterclockwise.

Modifier

Étape 3

HP OfficeJet 4650 Power Button Replacement: étape 3, image 3 de 3

Release the front panel from its internal hooks by applying a little force and sliding the front panel to the right.
Push the panel upward to remove it from the printer.
There is a connector attached to the back of the panel. Flip the front cover towards you gently and proceed to the next step.

Modifier

Étape 4

HP OfficeJet 4650 Power Button Replacement: étape 4, image 3 de 3

Remove the connector that is attached to the screen's circuit board by pinching the blue part of the connector with two fingers and pulling it away from the circuit board.

Modifier

Étape 5

HP OfficeJet 4650 Power Button Replacement: étape 5, image 3 de 3

Using the Torx T6 hex screwdriver, remove the 7.0mm screw that binds the front cover to the printer body by turning the screw counterclockwise.

Modifier

Étape 6

HP OfficeJet 4650 Power Button Replacement: étape 6, image 3 de 3

Remove the connector that is attached to the screen's circuit board by pinching the blue part of the connector with two fingers and pulling it away from button circuit board.

Modifier