Introduction

Paper trays are easy to break but thankfully it is an easy repair with only one tool required.

Pièces

Aucune pièce nécessaire.

Begin by turning your printer upside down.
  • Begin by turning your printer upside down.

  • It can be helpful to position an object beneath the printer to keep it level while you work on it.

Ajouter un commentaire

Use the T-10 screwdriver to remove the two 11-mm screws.
  • Use the T-10 screwdriver to remove the two 11-mm screws.

Ajouter un commentaire

  • Pull the paper tray out until it hits the stops on either side of the tray.

Ajouter un commentaire

  • Lift up on one side of the black plastic bar with one hand while pulling the paper tray out of the printer with your other hand.

  • The side of the tray should slide away from the printer a little bit.

Ajouter un commentaire

  • Repeat the previous step but for the other side of the tray.

Ajouter un commentaire

  • The paper tray should now be free to slide away from the printer.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Tyler Allen

Membre depuis le 24/01/2018

324 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team S18-G3, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S18-G3, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G3

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 25

Total : 152