Introduction

Is the glass plate in your printer broken? Consider using this guide to replace the glass plate in your printer.

Pièces

Aucune pièce nécessaire.

  1. Insert 2 fingers in the dent on the right side of the printer and pull towards the front of the printer.
    • Insert 2 fingers in the dent on the right side of the printer and pull towards the front of the printer.

    • Using fingers to open the cover of the scanner which located on the top of the printer.

  2. Remove four 10mm screws on the panel with T8 torx security screwdriver.
    • Remove four 10mm screws on the panel with T8 torx security screwdriver.

    • Remove the cover of the top part.

    • Remove eight 10mm screws on the back of the controlling keyboard with T8 torx security screwdriver.

    • Remove the back board of the controlling keyboard.

    • Remove the controlling keyboard with hands.

    • Using fingers to open the back cover board of the glass plate.

    • Remove the 10mm screw on the right of the board with T8 torx security screwdriver.

    • Remove the part that is under the 10mm screw.

    • Remove the glass plate with hands.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jiayin Zhu

Membre depuis le 21/10/2018

349 Réputation

3 tutoriels rédigés

Équipe

UC Davis, Team S11-G8, Lore Fall 2018 Membre de l'équipe UC Davis, Team S11-G8, Lore Fall 2018

UCD-LORE-F18S11G8

3 membres

4 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 10

Total : 26