Introduction

The front panel door may not close properly after repeated use. This guide will show how to remove the front panel door.

Pièces

Aucune pièce nécessaire.

Open the front panel door by pulling forward on the slot located on the front-left side of the printer.
  • Open the front panel door by pulling forward on the slot located on the front-left side of the printer.

Ajouter un commentaire

Insert the plastic opening tool into the right socket connecting the front panel door to the hinge guide.
  • Insert the plastic opening tool into the right socket connecting the front panel door to the hinge guide.

  • Pry the socket open, lifting the door hinge guide out of place.

Ajouter un commentaire

  • Pull the door-hinge guide to the right to detach its left socket.

  • Lift the door-hinge guide upward and away from the front panel door.

Ajouter un commentaire

  • Grab the front panel door close to its hinge on the right side.

  • Pull the front panel door away from the printer toward you.

  • Extra force may be required to pull the door from its hinge.

Ajouter un commentaire

  • Grab the front panel door close to its two hinges on the left side.

  • Pull the front panel door away from the printer toward you.

  • Extra force may be required to pull the door from its hinges.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Maegan Betz

Membre depuis le 18/04/2018

176 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S16-G4, Livingston Spring 2018 Membre de l'équipe Cal Poly, Team S16-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S16G4

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 10

30 derniers jours : 47

Total : 163