Aller au contenu principal

Introduction

The button can get stuck or break completely. This guide will show how to remove the button from the printer.

Pièces

Aucune pièce spécifiée.

  1. Locate the power button on the bottom left side of the device. Wedge the opening tool into the small gap between the power button panel and printer. Apply pressure on the opening tool and open the power button panel.
    • Locate the power button on the bottom left side of the device.

    • Wedge the opening tool into the small gap between the power button panel and printer.

    • Apply pressure on the opening tool and open the power button panel.

    • Gently remove the power button panel assembly from the printer to access the power button.

  2. Press on the power button from the front of the panel to release it. Press on the power button from the front of the panel to release it.
    • Press on the power button from the front of the panel to release it.

  3. Turn the panel around so you are viewing the back of it. Disconnect the power button  from the panel by gently  pulling the button out (toward your body).
    • Turn the panel around so you are viewing the back of it.

    • Disconnect the power button from the panel by gently pulling the button out (toward your body).

    • Be careful not to crack the connector of the button panel when pulling the power button

Conclusion

To reassemble your device, follow these instructions in reverse order.

Scott

Membre depuis le 24/01/2018

467 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team S19-G2, Livingston Spring 2018 Membre de l'équipe Cal Poly, Team S19-G2, Livingston Spring 2018

CPSU-LIVINGSTON-S18S19G2

1 membre

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 34

Total : 1,636