Aller au contenu principal

Introduction

This guide will show how to replace the printer head for the printer.

  1. Open the  printer head cover door by pulling the cover door.
    • Open the printer head cover door by pulling the cover door.

    • Power on the printer. This will move the print head to the left so you can access it.

    • Unplug the power cable from the back of the printer.

    • Do not power down the printer using the power button, as this will cause the printhead to move back to the right, making it incaccessible.

  2. Locate the printer head on the left side of the printer. Locate the printer head on the left side of the printer.
    • Locate the printer head on the left side of the printer.

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. Pull the white plastic tab on the right of the printhead toward you on an upward swing to unlock the printhead. Pull the white plastic tab on the right of the printhead toward you on an upward swing to unlock the printhead.
    • Pull the white plastic tab on the right of the printhead toward you on an upward swing to unlock the printhead.

  5. Gently pull out the printer head. Gently pull out the printer head.
    • Gently pull out the printer head.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Scott

Membre depuis le 24/01/2018

355 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team S19-G2, Livingston Spring 2018 Membre de l'équipe Cal Poly, Team S19-G2, Livingston Spring 2018

CPSU-LIVINGSTON-S18S19G2

1 membre

3 tutoriels rédigés

Did not work for me on my HP 8620.

Sam Cauchi - Réponse

Do you sell the replacement print head box for the HP Officejet pro 8620?

Do you post to England?

Thanks Pat Trotter

Pat Trotter - Réponse

How about always paperjam and printhead just moving by 1 inch

Setiawan Ayooservice - Réponse

Replacing easy.

BUT. Can it be repaired? Someone real experience with it?

PS. Of course only as no physical damage from outside and all 4 ink chambers (1) still sealed properly and (2) never have run empty

lbruederlin - Réponse

Did not work for me. Followed the instruction and re installed the printhead. Same issue.

abenani2000 - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 11

7 derniers jours : 102

30 derniers jours : 373

Total : 6,072