Introduction

Make sure the power cord is not plugged in and that the device is powered completely off before you begin. Before making any hardware changes to this laptop, make sure the battery is completely removed. This will make repair safer for both you and your laptop.

Pièces

Aucune pièce nécessaire.

  1. Use a PH000 screwdriver to unscrew the eleven 4mm Phillip head screws located on the back panel. Use a PH000 screwdriver to unscrew the eleven 4mm Phillip head screws located on the back panel.
    • Use a PH000 screwdriver to unscrew the eleven 4mm Phillip head screws located on the back panel.

  2. Using the iFixit opening tool, pry open and remove the back cover of the laptop.
    • Using the iFixit opening tool, pry open and remove the back cover of the laptop.

    • Be gentle when applying force to the cover.

  3. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Use a PH000 screwdriver to unscrew the four 3.5mm Philips head screws located on the battery. Use a PH000 screwdriver to unscrew the four 3.5mm Philips head screws located on the battery.
    • Use a PH000 screwdriver to unscrew the four 3.5mm Philips head screws located on the battery.

  5. Disconnect the port connecting the battery and the motherboard and then remove. Disconnect the port connecting the battery and the motherboard and then remove.
    • Disconnect the port connecting the battery and the motherboard and then remove.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stephanie Henry

Membre depuis le 02/10/2018

834 Réputation

5 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 6

7 derniers jours : 15

30 derniers jours : 74

Total : 251