HP Pavilion 15-eg0025nr Back Panel Replacement

Introduction

This guide will show you how to completely remove the HP Pavilion 15-eg0025nr back panel. The back panel is on the underside of the laptop and protects many of the laptop's internal components.

Removing the back panel allows you to access many internal parts of the HP Pavilion 15-eg0025nr that are necessary for most repairs or replacements, such as the battery or fan.

Before attempting to remove the back panel, unplug the laptop and turn it off.

Ce dont vous avez besoin

Étape 1 Back Panel

HP Pavilion 15-eg0025nr Back Panel Replacement, Back Panel: étape 1, image 1 de 1

Unplug and turn off the laptop before removing the back panel
Flip over the computer so that the back panel is facing upwards.
Remove the two silver screws on the bottom of the laptop using a Phillips #00 screwdriver.

Modifier

Étape 2

Peel up each end of the two gray rubber stoppers using your fingers or an opening pick.
This may be difficult if it is your first time removing them.
Remove the two black screws underneath the rubber stoppers with the Phillips #00 screwdriver

Modifier

Étape 3

HP Pavilion 15-eg0025nr Back Panel Replacement: étape 3, image 3 de 3

Slide the opening pick around the edges of the laptop where the chassis has a seam.
You will hear a clicking noise as you undo the clips of the chassis.
It may be easier to start with the four corners of the laptop, and then follow through with the sides.