Réparez vos affaires Communauté Boutique

HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement

Introduction

HP Pavilion Wave comes with a pair of built-in mouse and keyboard. This guide shows you how to replace them without using any additional USB-port for your mouse and keyboard.

Ce dont vous avez besoin

  1. HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement, Front IO Board: étape 1, image 1 de 2 HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement, Front IO Board: étape 1, image 2 de 2

    • Turn over the computer and remove the rubber feet.

    • Remove the 8mm Philips screws indicated in red circles with a Philips #0 screwdriver.

    • Use a pry tool and lift the lid.

    Modifier

  2. HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: étape 2, image 1 de 2 HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: étape 2, image 2 de 2

    • Pry open the casing from the back of the IO panel, as shown in the pictures.

    Modifier

  4. HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: étape 3, image 1 de 2 HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: étape 3, image 2 de 2

    • Finally, remove the two cables circled in red from the front IO panel.

    Modifier

  5. HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement, Mouse and Keyboard adapter: étape 4, image 1 de 1

    • Locate a blue USB adapter on the left side of the hard disk compartment.

    Modifier

  6. HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: étape 5, image 1 de 2 HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: étape 5, image 2 de 2

    • Take off the USB with gentle but firm pressure.

    • This is a single USB adapter for both mouse and keyboard, so you must get a wireless mouse and keyboard pair, or you will have to use the extra USB for the other one.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 1 autre contributeur

Kyaw Soe

Membre depuis le 09/27/17

321 Réputation

2 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Cal Poly, Team S8-G4, Banghart Fall 2017 Membre de l'équipe Cal Poly, Team S8-G4, Banghart Fall 2017

CPSU-BANGHART-F17S8G4

4 membres

5 tutoriels rédigés

3 commentaires

Seems like there might be enough room for a usb 2 port hub/splitter (such as Onvian USB Splitter Cable Male to 2 Female Adapter USB) to add an additional usb dongle (such an RF or Insteon USB)? Can you confirm how much room there are?

thomastranrx - Réponse

Since it's a year old project, I forgot most of the dimensions, but from my memory, it would be possible since it's located in a little groove that can probably fit a wire or two. (You can see it in step one picture)

Kyaw Soe - Réponse

Can i purchase this dongle anywhere? Is there any documentation on how to pair?

will - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 4

Total : 2,292