Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lay the computer face-down on a flat surface. Orient the computer to match the image.
-
Locate the battery release switch, as indicated in the image by the red rectangle. Slide the switch from right to left, and remove the battery.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Locate the hard drive cover. Note that in this image, the RAM cover is still in place.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two screws securing the hard drive cover.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 5.0mm screws securing the hard drive bracket.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide the hard drive to the right until the edge of the hard drive is flush with the computer frame.
-
Lift the hard drive out of the hard drive bay, left side first.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.