Introduction

In this guide, you will learn how to replace your RAM.

Shut down the computer and unplug it from the outlet.
  • Shut down the computer and unplug it from the outlet.

  • All screws removed in this guide will require a Phillips #00 screwdriver.

Ajouter un commentaire

Turn the computer upside down.
  • Turn the computer upside down.

Ajouter un commentaire

  • Loosen the three screws from the memory module compartment cover

  • Screws will not come all the way out.

Ajouter un commentaire

  • Remove the memory module compartment cover.

Ajouter un commentaire

  • Remove the first memory module by spreading apart the two silver retaining tabs, using your thumb and index finger.

  • Pull and lift the green memory module upward at a 45-degree angle, and then pull the memory module out of the computer.

  • If you are replacing both memory cards, repeat this step with the bottom memory card.

Ajouter un commentaire

  • To replace the memory card, insert the card at a 45-degree angle, then push into slot.

  • Push down gently so the silver retaining tabs click back into place.

  • If you are replacing both memory cards, replace the bottom card (closest to the system board) first.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Jaime

Membre depuis le 23/01/2014

458 Réputation

1 tutoriel rédigé

Équipe

New Mexico State, Team 1-3, Sheppard Spring 2014 Membre de l'équipe New Mexico State, Team 1-3, Sheppard Spring 2014

NMSU-SHEPPARD-S14S1G3

4 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 16

Total : 1,593