Réparez vos affaires Communauté Boutique

HP Pavilion dv6t-1200 Disk Tray Replacement

Introduction

A disk tray is a piece of hardware that can help with many tasks at hand that can make the laptop run smoothly and being able to watch movies as well. When beginning the repair make sure to have a clean area as many things might fall out the disk tray itself.

The disc tray can be used for multiple things such as watching old movies or being able to download material in order to update your pc interface. It can also help clean out all the junk that was in your laptop and be able to make it run smoothly.

Ce dont vous avez besoin

  1. HP Pavilion dv6t-1200 Disk Tray Replacement, Disk Tray: étape 1, image 1 de 2 HP Pavilion dv6t-1200 Disk Tray Replacement, Disk Tray: étape 1, image 2 de 2

    • Locate the small hole on the right side of the disk tray next to the button.

    Modifier

  2. HP Pavilion dv6t-1200 Disk Tray Replacement: étape 2, image 1 de 2 HP Pavilion dv6t-1200 Disk Tray Replacement: étape 2, image 2 de 2

    • Extend the paper clip into a straight line and insert it into the disk tray hole located next to the release button.

    • When the disk tray is removed, make sure to clean the general area with canned air.

    Modifier

  4. HP Pavilion dv6t-1200 Disk Tray Replacement: étape 3, image 1 de 1

    • Flip the laptop to the other side and remove the four screws on the bottom of the disk tray using a Phillips #0 screwdriver.

    Modifier

  5. HP Pavilion dv6t-1200 Disk Tray Replacement: étape 4, image 1 de 2 HP Pavilion dv6t-1200 Disk Tray Replacement: étape 4, image 2 de 2

    • Remove the metal plate and locate the bottom right tool for the disk tray.

    Modifier

  6. HP Pavilion dv6t-1200 Disk Tray Replacement: étape 5, image 1 de 2 HP Pavilion dv6t-1200 Disk Tray Replacement: étape 5, image 2 de 2

    • Replace the motor piece that is being held and reclose the device.

    Modifier

  7. HP Pavilion dv6t-1200 Disk Tray Replacement: étape 6, image 1 de 2 HP Pavilion dv6t-1200 Disk Tray Replacement: étape 6, image 2 de 2

    • After replacing the motor and the placing the metal tray apply a good amount of WD40.

    • Once all completed the disk tray should be working smoothly.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Daniel Pelayo

Membre depuis le 10/05/21

210 Réputation

1 tutoriel rédigé

Badges: 4

+ 1 badge de plus

Équipe

CSU Los Angeles, Team 11-21, Grodsky Fall 2021 Membre de l'équipe CSU Los Angeles, Team 11-21, Grodsky Fall 2021

CSULA-GRODSKY-F21S11G21

1 membre

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 16

Total : 255