Introduction

This guide will explain how to replace the screen, assuming none of the electric connections have been damaged and the screen is the only damaged part. Some of the inner parts have sharp, metal corner and minor injury can occur if you rush through the guide.

Remove two 5.0 mm Philips #0 screws on the hinge of the device
  • Remove two 5.0 mm Philips #0 screws on the hinge of the device

Ajouter un commentaire

Using tweezers, gently pull on the hinges to remove the plastic case connected to the hinges
  • Using tweezers, gently pull on the hinges to remove the plastic case connected to the hinges

Ajouter un commentaire

  • Remove the connection between the plastic case and interior of the device

Ajouter un commentaire

  • Remove the connection from the exposed hinge and interior of the device

Ajouter un commentaire

  • Remove the 3.5 mm philips #00 screw on the small circuit board on the hinge

Ajouter un commentaire

  • Remove the 5.0 mm philips #0 screw that was hidden underneath the small circuit board

Ajouter un commentaire

  • Remove the 6 plastic caps located in the four corners of the screen and the top of the screen

  • It may be easier to use tweezers for this part

Ajouter un commentaire

  • Unscrew the six 5.0 mm Philips #0 screws underneath the caps

Ajouter un commentaire

  • Using a spudger, pry the plastic casing off of the screen.

Ajouter un commentaire

  • Remove four 5.0 mm Philips #0 screws located in the corners of the screen

  • These screws locations will be close to the screws locations in step 2.

  • During reassembly, make sure you do not confuse the proper screw placements from this step and step 4.

Ajouter un commentaire

  • Remove the four 3.5 mm Philips #00 screws from the sides of the aluminum casing.

  • There will be two 3.5 mm Philips screws on each side

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Eric Beaudry

Membre depuis le 06/03/2018

727 Réputation

3 tutoriels rédigés

Équipe

UMass Dartmouth, Team S2-G7, Bernier Spring 2018 Membre de l'équipe UMass Dartmouth, Team S2-G7, Bernier Spring 2018

UMASSD-BERNIER-S18S2G7

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 18