Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Open the printer's mouth by pulling the two mouth pieces down.
-
Lift the flap covering the scanner. When you are finished, the printer should appear as shown.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the flap for the scanner by pulling lightly on the clip that attaches it to the printer.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the three screws from the top of the printer using a T9 screwdriver as shown.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Reach into the mouth of the printer and press the clip behind the power button to release the power button face.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
After pressing the clip, pull out the face of the power button by sliding it from the right to the left side.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Loosen the plastic holder by pulling the slots on the face plate away from the plastic holder.
-
Remove the plastic holder from the face plate after the slots are loosened.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a spudger, push the holders inward to detach the button from the plastic holder.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.