Aller au contenu principal

HP ProOne 600 G1 Wi-Fi Adapter Replacement

Ce dont vous avez besoin

  1. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Back Removal: étape 1, image 1 de 2 HP ProOne 600 G1 Wi-Fi Adapter Replacement, Back Removal: étape 1, image 2 de 2
    • Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

  2. HP ProOne 600 G1 Wi-Fi Adapter Replacement: étape 2, image 1 de 2 HP ProOne 600 G1 Wi-Fi Adapter Replacement: étape 2, image 2 de 2
    • Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

  3. HP ProOne 600 G1 Wi-Fi Adapter Replacement: étape 3, image 1 de 1
    • Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

  4. HP ProOne 600 G1 Wi-Fi Adapter Replacement: étape 4, image 1 de 1
    • Remove the backplate by pulling it back towards you.

    • Small plastic tabs hold in the backplate, pull these up to remove it.

  5. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Wi-Fi Adapter: étape 5, image 1 de 2 HP ProOne 600 G1 Wi-Fi Adapter Replacement, Wi-Fi Adapter: étape 5, image 2 de 2
    • Locate the Wi-Fi adapter at the top right corner of where the stand once was.

    • Unscrew the screws using the Philips #1 Screwdriver.

  6. HP ProOne 600 G1 Wi-Fi Adapter Replacement: étape 6, image 1 de 1
    • Remove wire tabs from the left side of the Wi-Fi adapter.

    • Remove the adapter

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Janelle Layman

Membre depuis le 10/01/15

258 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 1-20, Maness Fall 2015 Membre de l'équipe Cal Poly, Team 1-20, Maness Fall 2015

CPSU-MANESS-F15S1G20

4 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 27

Total : 3,842