Réparez vos affaires Communauté Boutique

HP Stream 13-c110nr USB/Card Reader Board Replacement

Introduction

The USB/SD card reader repair guide will assist the user in removal and installation for the HP Stream 13-c110nr.

Ce dont vous avez besoin

  1. HP Stream 13-c110nr USB/Card Reader Board Replacement, Keyboard Assembly: étape 1, image 1 de 1

    • Close the device.

    • Remove AC adapter plug from electrical outlet.

    • Remove AC adapter from device.

    • Turn the device off.

    • Unplug all external devices from device.

    • If you are unsure whether the computer is off or in hibernation mode, start the computer and then shutdown the operating system.

    Modifier

  2. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 2, image 1 de 1

    • Turn the device upside down with the back facing towards you.

    Modifier

  3. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 3, image 1 de 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 3, image 2 de 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 3, image 3 de 3

    • Use a pick to remove the two (2) large computer feet along the back edge of the device.

    • Use a pick to remove the two (2) small computer feet.

    • Use a pick to remove the one (1) screw cover.

    • Place rubber computer feet in safe place for reassembly.

    Modifier

  4. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 4, image 1 de 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 4, image 2 de 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 4, image 3 de 3
    Outil utilisé dans cette étape :
    Magnetic Project Mat
    $19.95
    J'achète

    • Remove the thirteen (13) Phillips P0 PM2.5x6.0 mm screws.

    • Place the thirteen (13) screws on magnetic mat for reassembly.

    Modifier

  5. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 5, image 1 de 1

    • Turn the device over with the front facing towards you.

    • Open the device as shown.

    Modifier

  6. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 6, image 1 de 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 6, image 2 de 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 6, image 3 de 3

    • Insert the Spudger between the Top Cover and Bottom Cover to lift the front edge until it separates from the Bottom Cover.

    • Do not completely remove the Keyboard/Top cover from the Bottom cover yet.

    Modifier

  8. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 7, image 1 de 1

    • Disconnect the Touchpad cable.

    Modifier

  9. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 8, image 1 de 2 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 8, image 2 de 2

    • Disconnect the Keyboard Cable.

    Modifier

  10. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 9, image 1 de 2 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 9, image 2 de 2

    • Disconnect the Power connector cable.

    Modifier

  11. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 10, image 1 de 1

    • Remove the Keyboard/Top Cover from the device.

    Modifier

  12. HP Stream 13-c110nr USB/Card Reader Board Replacement, Battery Assembly: étape 11, image 1 de 2 HP Stream 13-c110nr USB/Card Reader Board Replacement, Battery Assembly: étape 11, image 2 de 2

    • Use a pick to detach the Battery assembly cable.

    Modifier

  13. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 12, image 1 de 2 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 12, image 2 de 2

    • Remove eight (8) Phillips P0 PM2.0x3.0 mm screws from Battery assembly.

    • Place eight (8) screws on magnetic mat for reassembly.

    Modifier

  14. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 13, image 1 de 1

    • Remove Battery Assembly from device.

    Modifier

  15. HP Stream 13-c110nr USB/Card Reader Board Replacement, USB/Card Reader Board: étape 14, image 1 de 2 HP Stream 13-c110nr USB/Card Reader Board Replacement, USB/Card Reader Board: étape 14, image 2 de 2

    • Use a pick to disconnect the USB/Card Reader cable from the System Board.

    Modifier

  16. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 15, image 1 de 2 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 15, image 2 de 2

    • Remove three (3) Phillips P0 PM2.0x3.0 mm screws.

    • Place three (3) screws on magnetic mat for reassembly.

    Modifier

  17. HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 16, image 1 de 2 HP Stream 13-c110nr USB/Card Reader Board Replacement: étape 16, image 2 de 2

    • Remove the USB/Card Reader board assembly from the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Stacey Deel

Membre depuis le 01/31/19

1 147 Réputation

9 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

Appalachian State University, Team S1-G2, Menagarishvili Spring 2019 Membre de l'équipe Appalachian State University, Team S1-G2, Menagarishvili Spring 2019

APSU-MENAGARISHVILI-S19S1G2

4 membres

15 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 2

Total : 216