Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
The purpose of this guide is to instruct the reader on how to replace the faceplates of their HP iPAQ H2200 device.
Ce dont vous avez besoin
-
-
-
Unscrew the two bottom screws on LCD screen that were previously located under the main board.
-
-
-
Remove the faceplate by unscrewing the green screw located on the top right of the front faceplate.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.