Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
To begin the disassembly of the device, place it on a flat surface with the screen facing down.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four screws found on the back cover of the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully remove the back cover using the plastic opening tool against the grooves along the sides of the iPAQ.
-
At this point, a yellow ribbon will be connecting both the front and back panels of the device. Carefully use the plastic opening tool to detach the ribbon from the connector pins.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the ribbon cable connected to the display motherboard by pulling the plastic clips on both sides towards the top of the device.
-
Use a plastic opening tool to carefully pull the brown ribbon cable from the connector.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the plastic opening tool to carefully remove the display motherboard from its housing.
-
Unplug the connector from the opposite end of the display motherboard.
-
Completely remove the component.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove three small screws from the corners of the motherboard using a Phillips head screwdriver.
-
Use your hands or plastic opening tool to carefully lift the motherboard out of its housing.
-
Remove two screws from the silver cover using a Phillips #00 screwdriver.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #00 screwdriver to remove the two screws at the bottom of the device.
-
Use a plastic opening tool to remove the button motherboard.
-