Pièces

Aucune pièce nécessaire.

  1. Flip the HP iPAQ HW6515 over with the screen facing down.
    • Flip the HP iPAQ HW6515 over with the screen facing down.

    • Take the back cover off by pressing on the small silver button while pulling back then up on the case.

    • Place the back of the case aside for now.

    Ajouter un commentaire

  2. Remove the battery by pulling up on the black tab.
    • Remove the battery by pulling up on the black tab.

    Ajouter un commentaire

    • Unscrew the four outside screws using the T6 hexagonal star screwdriver.

    • Unscrew the inside middle screw using a Phillips 00 screwdriver.

    • "Warranty VOID if broken" sticker might be covering the middle screw, if this is the case, peel it off to reveal the screw.

    Ajouter un commentaire

    • Use the plastic opening tool to pry apart the covers along the bottom of the phone.

    • Slide the plastic opening tool along the seam until the two halves of the case separate.

    Ajouter un commentaire

    • Unplug the sensor wire that connects the two halves of the case before pulling the two halves apart. Not doing so will damage the sensor wire.

    Ajouter un commentaire

    • Use a 00 Phillips screwdriver to remove the three small screws holding down the motherboard.

    Ajouter un commentaire

    • Peel back the black tape that covers the connector.

    • It is fine if one of the left connectors comes off along with the tape.

    Ajouter un commentaire

    • Lift the black tab to a 45 degree angle.

    • Use a screwdriver to get under the tape and disconnect the tape from the black tab.

    Ajouter un commentaire

    • Gently pry the motherboard out of the front casing, bottom first.

    • Disconnect the wire connecting the motherboard to the front casing. Using too much force will damage this wire.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ashley Schaefer

Membre depuis le 04/04/2012

83 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 15-17, Forte Spring 2012 Membre de l'équipe Cal Poly, Team 15-17, Forte Spring 2012

CPSU-FORTE-S12S15G17

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 4

Total : 957